Free Structural Design Courses Online!
If you’ve been searching for Free Structural Design Courses Online to enroll in, you’ve come to the right location, as we’ve gone to great lengths to compile approximately 13 of these fully online courses.
Also read: 13 Best Genetics Courses Online
With the current state of the globe, many things are shifting online. Businesses, shops, and other aspects of daily life have migrated online. Therefore, there are no obstacles between you and free online education.
The University of People is quoted in its article titled “Benefits of education are societal and personal” as saying, “Education has many benefits. Education benefits not only the individual in terms of income, career advancement, skill development, and employment opportunities, but also the society and community.
This is a fact that should be kept in mind while taking the Free Structural Design Courses Online. Remember that not only you, but also society, will benefit from the course.
What is structural architecture?
Structural design is defined by the FAO as “the systematic investigation of the stability, strength, and rigidity of structures.” The fundamental goal of structural analysis and design is to create a structure that can withstand all applied loads without failing during its intended service life.
A structure’s primary function is to transmit or sustain loads. If the structure is inadequately designed or constructed, or if the actual applied loads exceed the design specifications, it is likely that the device will fail to perform its intended function, which could have severe consequences.
List of the Free Structural Design Courses Online
The following is a list of the Free Structural Design Courses Online:
- Mechanics of Materials II: Thin-Walled Pressure Vessels and Torsion
- The Art of Structural Engineering: Vaults
- Structure of Materials, Part 1: Fundamentals of Materials Structure
- Structure of Materials, Part 2: The Crystalline State
- Structure of Materials, Part 3: Liquid Crystals, Defects, and Diffusion
- Materials Science: 10 Things Every Engineer Should Know
- Material Behavior
- Material processing
- Materials Science and Engineering
- Design of Steel-Concrete Composite Structures
- Steel Beam and Plate Girder Design
- Connections in Steel Structures
- Machine Design Part I
#1 – Materials Mechanics II: Thin-Walled Pressure Vessels and Torsion
As one of the Free Structural Design Courses Online, This free online course in structural design is taught by Dr. Wayne Whiteman, PE from the Georgia Institute of Technology and delivered by Coursera. This course examines the analysis and design of engineering structures and thin-walled pressure vessels subjected to torsion.
- Three weeks lengthy with nine hours of material
- Location – Coursera
- Start date – Permanently Open
2. The Art of Structural Engineering: Vaults
This is one of the best Free Structural Design Courses Online taught by Maria Garlock from Princeton University via the edX online learning platform. The course examines iconic vaults such as the Pantheon, but focuses primarily on vaults constructed after the industrial revolution.
The vaults to be investigated are comprised of a variety of materials, including tile, reinforced concrete, steel, and glass, and were created by engineers/builders such as Rafael Guastavino, Anton Tedesko, Pier Luigi Nervi, Eduardo Torroja, Félix Candela, and Heinz Isler.
- Full-time for six weeks. 1-2 hours weekly
- Location – edX
- Date of start – Self-paced
3 – Structure of Materials, Part 1: Materials Structure Fundamentals
This is one of the most popular Free Structural Design Courses Online taught by Silvija Gradecak of the Massachusetts Institute of Technology via edX.
This course is the first in a three-part series from MIT’s Department of Materials Science and Engineering that examines the structure of a broad variety of engineering-relevant materials.
Together, these three courses provide similar content to the MIT materials structure curriculum for sophomores.
The introduction to amorphous substances is presented in the first section of this exposition. You will learn about the factors that influence the structure of glasses and polymers, as well as how materials scientists measure and describe the structure of these materials.
Then, we discuss the crystalline state, exploring what it means for a material to be crystalline, how we define the periodic arrangement of atoms in a crystal, and how x-ray diffraction can be used to determine the structure of crystals.
- 5 weeks of full-time work. 6 to 8 hours weekly
- Location – edX
- Date of start – Self-paced
4 – Material Structure, Part 2: The Crystalline State
This is one of the Free Structural Design Courses Online offered by Silvija Gradecak of the Massachusetts Institute of Technology via edX.
The second section provides an introduction to crystallography. We begin by examining crystals and their two-dimensional symmetries. Then, we expand into three dimensions and investigate the crystalline structures that undergird the majority of the surrounding materials.
We conclude by examining how tensors can be used to represent the properties of three-dimensional materials and demonstrating how these properties vary as a function of crystalline symmetry.
- 5 weeks of full-time work. 8 to 10 hours weekly
- Location – edX
- Date of start – Self-paced
5. Part 3 of the Structure of Materials course covers liquid crystals, defects, and diffusion.
This free online course in structural design is taught by Silvija Gradecak of the Massachusetts Institute of Technology via edX.
The third section commences with a discussion of quasi-, plastic, and liquid crystals. Next, we will examine how structural defects influence and alter the properties of materials. We will demonstrate that at finite temperatures, point defects are present in all crystals and that their presence governs diffusion in materials. It is one of the Free Structural Design Courses Online.
Next, we will discuss material dislocations. We will discuss the descriptors used to describe dislocations, the motion of dislocations, and the profound effect dislocations have on the strength of materials.
Finally, we will investigate how defects can be used to reinforce materials, as well as the properties of other structural defects, such as stacking faults and grain boundaries.
- Full-time for six weeks. 6 to 8 hours weekly
- Location – edX
- Date of start – Self-paced
6 – Materials Science: Ten Facts Every Engineer Needs to Know
This is one of the well-known Free Structural Design Courses Online offered by James Shackelford of the University of California, Davis via Coursera.
The course examines “ten things” ranging from the materials available to engineers in their profession to the mechanical and electrical properties of materials that are crucial to their application in various engineering disciplines. We also discuss the manufacturing principles behind these materials.
- 5 weeks of full-time work. 9 hours’ worth of content
- Location – Coursera
- Start date – Permanently Open
7 – Material Conduct
This is one of several Free Structural Design Courses Online taught by Thomas H. Sanders Jr. of Georgia Institute of Technology through Coursera.
This is the first of three Coursera courses that replicate the Introduction to Materials Science course taken by the majority of Georgia Tech engineering undergraduates. The objective of the course is to help students comprehend the engineering materials used in the surrounding environment.
This first section addresses the fundamentals of materials science including atomic structure and bonding, crystal structure, atomic and microscopic defects, and noncrystalline materials such as glasses, rubbers, and polymers.
- Full-time for six weeks. 25 hours of content are included.
- Location – Coursera
- Start date – Permanently Open
8 – Material handling
This free online course in structural design is taught by Thomas H. Sanders Jr. of Georgia Institute of Technology via Coursera.
This is the second of three Coursera courses that replicate the Introduction to Materials Science course taken by the majority of Georgia Tech engineering undergraduates. The objective of the course is to help students comprehend the engineering materials used in the surrounding environment.
This first section addresses the fundamentals of materials science including atomic structure and bonding, crystal structure, atomic and microscopic defects, and noncrystalline materials such as glasses, rubbers, and polymers. It is one of the Free Structural Design Courses Online.
- Full-time for two weeks. 12 hours’ worth of content
- Location – Coursera
- Start date – Permanently Open
9 – Materials Engineering and Science
Alexander S. Mukasyan of the National University of Science and Technology (MISiS) teaches this course via edX.
The course material relates closely to chemical, mechanical, electrical, computing, bio-, and civil engineering. This course will cover the fundamental properties of a wide range of materials, including metals, ceramics, polymers, and electronic materials.
- Full-time for seven weeks. 1-3 hours weekly
- Location – edX
- Date of start – Self-paced
10. Design of Composite Steel-Concrete Structures
This subject is taught through edX by Amit Varma, Sahaas Bhardwaj, and Morgan Broberg of Purdue University.
This course will examine the design of composite structures, with a focus on composite beams and floor systems, composite columns, and composite walls.
This course will provide students with a thorough understanding of relevant limit states and failure modes, as well as AISC360 (American Institute of Steel Construction) provisions for composites.
This course is best adapted for students with a background in civil engineering at the undergraduate level, including a course in basic steel design. It will build on these concepts. It is one of the Free Structural Design Courses Online.
- Full-time for eight weeks. 1-2 hours weekly
- Location – edX
- Start date – Permanently Open
11 – Design of Steel Beams and Plate Girders
This subject is taught through edX by Amit Varma, Sahaas Bhardwaj, and Morgan Broberg of Purdue University.
This course will provide students with an in-depth understanding of relevant limit states and failure modes, as well as a familiarity with the American Institute of Steel Construction (AISC360) provisions for plate girder design.
This course is best adapted for students with a background in civil engineering at the undergraduate level, including a course in basic steel design. It will build on these concepts. It is also one of the Free Structural Design Courses Online.
- Full-time for eight weeks. 1-2 hours weekly
- Location – edX
- Start date – Permanently Open
12 – Steel Structure Connections
This free course in structural design is taught by Amit Varma, Sahaas Bhardwaj, and Morgan Broberg of Purdue University via the edX online learning platform.
This course will focus on eccentrically laden bolted and welded connections, moment connections, and connections transferring concentrated forces.
This course will provide students with an in-depth understanding of relevant limit states and AISC360 (American Institute of Steel Construction) provisions for simple and moment connections. It is one of the Free Structural Design Courses Online.
This course is best adapted for students with a background in civil engineering at the undergraduate level, including a course in basic steel design. It will build on these concepts.
- Full-time for eight weeks. 2-3 hours in duration
- Location – edX
- Start date – Permanently Open
13. Part I of Machine Design
Through Coursera, Dr. Kathryn Wingate of the Georgia Institute of Technology teaches one of the best Free Structural Design Courses Online.
You will learn robust analysis techniques to predict and validate design performance and life in this first course.
We will begin by reviewing crucial material properties in design, such as tension, strength, and thermal expansion coefficient. The discussion then shifts to static failure theories, such as von Mises theory, which can be used to prevent failure in static loading applications, such as bridge timbers.
Last but not least, we will study fatigue failure criteria for designs subject to dynamic stresses, such as the input shaft of an automobile’s transmission.
- 5 weeks of full-time work. 31 hours’ worth of content
- Location – Coursera
- Start date – Permanently Open
FAQs On Free Structural Design Courses Online
What’s the difference between structural and civil engineering?
Civil engineers take care of the initial design and planning of constructions and maintenance. They manage the construction site and ensure the respect of code regulations. Structural engineers are primarily responsible for buildings' structural aspects by focusing on load-bearing design and material inspection.
How do I become a structural design engineer?
To become a structural engineer, one needs a Bachelor's degree in Civil Engineering. After a Bachelor's degree, one can take up Specialization in Structural Engineering which is offered under M. Tech in Civil Engineering. This will help students enhance their skills and career opportunities as well.
Which tool is used for structural designing?
STAAD Pro: STAAD Pro is one of the most widely used structural analysis and design software. It supports several steel, concrete and timber design codes.
Can a structural engineer design a building?
As civil engineers, structural engineers are capable of designing houses, however it is not their area of expertise. Structural engineers are concerned with the design of the structural elements of buildings including houses and may even have had some training in aspects of architecture and construction.
English 
العربية 
Deutsch 
हिन्दी 
简体中文 