13 Free Structural Design Courses Online

Free Structural Design Courses Online!

If you’ve been searching for Free Structural Design Courses Online to enroll in, you’ve come to the right location, as we’ve gone to great lengths to compile approximately 13 of these fully online courses.

With the current state of the globe, many things are shifting online. Businesses, shops, and other aspects of daily life have migrated online. Therefore, there are no obstacles between you and free online education.

The University of People is quoted in its article titled “Benefits of education are societal and personal” as saying, “Education has many benefits. Education benefits not only the individual in terms of income, career advancement, skill development, and employment opportunities, but also the society and community.

This is a fact that should be kept in mind while taking the Free Structural Design Courses Online. Remember that not only you, but also society, will benefit from the course.

What is structural architecture?

The FAO defines structural design as “the methodical investigation of structures’ stability, strength, and rigidity.” The fundamental goal of structural analysis and design is to create a structure that can withstand all applied loads without failing during its intended service life.

A structure’s primary function is to transmit or sustain loads. If the structure is inadequately designed or constructed, or if the actual applied loads exceed the design specifications, it is likely that the device will fail to perform its intended function, which could have severe consequences.

Check out: 10 Work from Home Nursing Jobs

List of the Free Structural Design Courses Online

The following is a list of the Free Structural Design Courses Online:

1 – Materials Mechanics II: Thin-Walled Pressure Vessels and Torsion

This Free Structural Design Courses Online is taught by Dr. Wayne Whiteman, PE of the Georgia Institute of Technology via Coursera. This course examines the analysis and design of engineering structures and thin-walled pressure vessels subjected to torsion.

• Three weeks lengthy with nine hours of material
• Venue – Coursera
• Start date – Permanently Open

2. The Art of Structural Engineering: Vaults

This is one of the finest Free Structural Design Courses Online taught by Maria Garlock from Princeton University via the edX online learning platform. The course examines iconic vaults such as the Pantheon, but focuses primarily on vaults constructed after the industrial revolution.

The vaults to be investigated are comprised of a variety of materials, including tile, reinforced concrete, steel, and glass, and were created by engineers/builders such as Rafael Guastavino, Anton Tedesko, Pier Luigi Nervi, Eduardo Torroja, Félix Candela, and Heinz Isler.

• Full time – 6 weeks duration. 1-2 hours weekly
• Venue – edX
• Date of start – Self-paced

3 – Structure of Materials, Part 1: Materials Structure Fundamentals

This is one of the most popular Free Structural Design Courses Online taught by Silvija Gradecak of the Massachusetts Institute of Technology via edX.

This course is the first in a three-part series from MIT’s Department of Materials Science and Engineering that examines the structure of a broad variety of engineering-relevant materials.

Together, these three courses provide similar content to the MIT materials structure curriculum for sophomores.

Part 1 begins with an overview of amorphous substances. You will learn about the factors that influence the structure of glasses and polymers, as well as how materials scientists measure and describe the structure of these materials.

Then, we discuss the crystalline state, exploring what it means for a material to be crystalline, how we define the periodic arrangement of atoms in a crystal, and how x-ray diffraction can be used to determine the structure of crystals.

• Full time – 5 weeks duration. 6 to 8 hours weekly
• Venue – edX
• Date of start – Self-paced

4 – Material Structure, Part 2: The Crystalline State

This is one of the many Free Structural Design Courses Online offered by Silvija Gradecak of the Massachusetts Institute of Technology via edX.

The second section provides an introduction to crystallography. We begin by examining crystals and their two-dimensional symmetries. Then, we expand into three dimensions and investigate the crystalline structures that undergird the majority of the surrounding materials.

We conclude by examining how tensors can be used to represent the properties of three-dimensional materials and demonstrating how these properties vary as a function of crystalline symmetry.

• Full time – 5 weeks duration. 8 to 10 hours weekly
• Venue – edX
• Date of start – Self-paced

5 – Structure of Materials, Part 3: Liquid Crystals, Defects, and Diffusion

This Free Structural Design Courses Online is taught by Silvija Gradecak of the Massachusetts Institute of Technology via edX.

The third section commences with a discussion of quasi-, plastic, and liquid crystals. Next, we will examine how structural defects influence and alter the properties of materials. We will demonstrate that at finite temperatures, point defects are present in all crystals and that their presence governs diffusion in materials.

Next, we will discuss material dislocations. We will discuss the descriptors used to describe dislocations, the motion of dislocations, and the profound effect dislocations have on the strength of materials.

Finally, we will investigate how defects can be used to reinforce materials, as well as the properties of other structural defects, such as stacking faults and grain boundaries.

• Full time – 6 weeks duration. 6 to 8 hours weekly
• Venue – edX
• Date of start – Self-paced

6 – Materials Science: Ten Facts Every Engineer Needs to Know

This is one of the well-known Free Structural Design Courses Online offered by James Shackelford of the University of California, Davis via Coursera.

The course examines “ten things” ranging from the materials available to engineers in their profession to the mechanical and electrical properties of materials that are crucial to their application in various engineering disciplines. We also discuss the manufacturing principles behind these materials.

• Full time – 5 weeks duration. 9 hours’ worth of content
• Venue – Coursera
• Start date – Permanently Open

7 – Material Conduct

This is one of several Free Structural Design Courses Online taught by Thomas H. Sanders Jr. of Georgia Institute of Technology through Coursera.

This is the first of three Coursera courses that replicate the Introduction to Materials Science course taken by the majority of Georgia Tech engineering undergraduates. The objective of the course is to help students comprehend the engineering materials used in the surrounding environment.

This section introduces the fundamentals of materials science, such as atomic structure and bonding, crystal structure, atomic and microscopic defects, and noncrystalline materials such as glasses, rubbers, and polymers.

• Full time – 6 weeks duration. 25 hours of content are included.
• Venue – Coursera
• Start date – Permanently Open

8 – Material refining

This free online course in structural design is taught by Thomas H. Sanders Jr. of Georgia Institute of Technology via Coursera.

This is the second of three Coursera courses that replicate the Introduction to Materials Science course taken by the majority of Georgia Tech engineering undergraduates. The objective of the course is to help students comprehend the engineering materials used in the surrounding environment.

This section introduces the fundamentals of materials science, such as atomic structure and bonding, crystal structure, atomic and microscopic defects, and noncrystalline materials such as glasses, rubbers, and polymers.It is one of the Free Structural Design Courses Online.

• Full time – 2 weeks long. 12 hours’ worth of content
• Venue – Coursera
• Start date – Permanently Open

9 – Materials Engineering and Science

Alexander S. Mukasyan of the National University of Science and Technology (MISiS) teaches this course via edX.

The course material relates closely to chemical, mechanical, electrical, computing, bio-, and civil engineering. This course will cover the fundamental properties of a wide range of materials, including metals, ceramics, polymers, and electronic materials.

• Full time – 7 weeks duration. 1-3 hours weekly
• Venue – edX
• Date of start – Self-paced
• Design of Composite Steel-Concrete Structures

10 – Design of Steel-Concrete Composite Structures

This subject is taught through edX by Amit Varma, Sahaas Bhardwaj, and Morgan Broberg of Purdue University.

This course will examine the design of composite structures, with a focus on composite beams and floor systems, composite columns, and composite walls.It is regarded as one of the Free Structural Design Courses Online.

This course will provide students with a thorough understanding of relevant limit states and failure modes, as well as AISC360 (American Institute of Steel Construction) provisions for composites.

This course is best adapted for students with a background in civil engineering at the undergraduate level, including a course in basic steel design. It will build on these concepts.

• Full time – 8 weeks lengthy. 1-2 hours weekly
• Venue – edX
• Start date – Permanently Open

11 – Steel Beam and Plate Girder Design

This subject is taught through edX by Amit Varma, Sahaas Bhardwaj, and Morgan Broberg of Purdue University.

This course will provide students with a thorough understanding of relevant limit states and failure modes, as well as AISC360 (American Institute of Steel Construction) provisions for plate girder design.

This course is best adapted for students with a background in civil engineering at the undergraduate level, including a course in basic steel design. It will build on these concepts.

• Full time – 8 weeks lengthy. 1-2 hours weekly
• Venue – edX
• Start date – Permanently Open

12 – Steel Structure Connections

This Free Structural Design Courses Online is taught by Amit Varma, Sahaas Bhardwaj, and Morgan Broberg of Purdue University via the edX online learning platform.

This course will focus on eccentrically laden bolted and welded connections, moment connections, and connections transferring concentrated forces.

This course will provide students with an in-depth understanding of relevant limit states and AISC360 (American Institute of Steel Construction) provisions for simple and moment connections.

This course is best adapted for students with a background in civil engineering at the undergraduate level, including a course in basic steel design. It will build on these concepts.

• Full time – 8 weeks lengthy. 2-3 hours in duration
• Venue – edX
• Start date – Permanently Open

13 – Machine Design Part I

Through Coursera, Dr. Kathryn Wingate of the Georgia Institute of Technology teaches one of the finest free online courses in structural design.

You will learn robust analysis techniques to predict and validate design performance and life in this first course.

We will begin by reviewing crucial material properties in design, such as tension, strength, and thermal expansion coefficient. The discussion then shifts to static failure theories, such as von Mises theory, which can be used to prevent failure in static loading applications, such as bridge timbers.

Last but not least, we will study fatigue failure criteria for designs subject to dynamic stresses, such as the input shaft of an automobile’s transmission.

• Full time – 5 weeks duration. 31 hours’ worth of content
• Venue – Coursera
• Start date – Permanently Open

FAQs On Free Structural Design Courses Online

Also read

• 13 Best Genetics Courses Online
• 9 Free Family Law Courses Online
• Best UX Design Courses Online
• 16 Best Free Food Hygiene Courses Online UK
• Wedding Planning Courses Online for Free
• Studying Engineering Courses Online without Practical Lab and Site
• Top 8 Free Online Spanish Courses